IGNITE 12.2 TECHNOLOGY

IGNITE 12.2 Shaft

Featuring the finest Japanese aerospace grade carbon fiber material coupled with the Ignite Composite Laminating Technology (ICLT) and a new responsive front-end design and the vibration-dampening core material, the IGNITE 12.2mm shaft ensures a true natural feel and minifies deflection which eliminates inconsistencies when using spin. The ICLT eradicates unwanted gaps and “dead lines” that can occur during the manufacturing process providing accuracy for ultimate playability. Together with the Ignite constant pro taper, this shaft delivers a smooth, stable and powerful feel after each shot.

IGNITE Composite Laminate Technology (ICLT)

The IGNITE Composite Laminate Technology utilizes the layers of the finest advance Japanese composite prepreg materials. This design eliminates inconsistent shots caused by shaft variability while generating power, a natural feel and ultimate cue ball control.

IGNITE Front End Technology

The new responsive front-end design consists of silencer foam and the IG Plate Ferrule that makes the front-end of the shaft stronger, more powerful and accurate while creating optimum flex with less tip end mass reducing cue ball deflection.

< Ignite Shaft Maintenance Instructions >

Surface :
Under no circumstances should the IGNITE shaft be sandpapered or modified as it will damage the shafts outer finish and harm the quality of the IGNITE shaft. Additionally, this may create micro cracks that might release potentially harmful ingredients dangerous to one’s health.
Any treatment with chemicals of the IGNITE shaft, including cleaning and conditioning liquids, will deteriorate the performance and invalidate the limited-lifetime warranty of the IGNITE shaft.
Do not ever use any smoothing powders or liquids on your IGNITE shaft.
For maintenance of the surface of the IGNITE shaft, we recommend to use wipes or cloth with Isopropyl Alcohol (80%).

Front-end :
The front end of the carbon fiber composite IGNITE shaft is constructed with the IG tip plate, the IG plate ferrule and high-performance tip. It is prohibited to sand the shaft and all maintenance work, including tip replacement, must be completed by an authorized Miki repair center or professional repairman using a special set of tools. Having maintenance work completed with non-authorized professionals or workshops may harm the IGNITE shaft and nullify the limited-lifetime warranty.
In the event of choosing to replace the tip on your shaft through a non-authorized repair center or repairman, specific information concerning the maintenance work is as follows:
Minimum Shaft Diameter : 0.05mm down from the original size
Minimum IG Tip Plate Thickness : 0.5mm
Minimum IG Plate Ferrule Thickness : 1.7mm
Any reduction in the above measurements will annul the shaft's limited-lifetime warranty and deteriorate its performance.